Skip to Content
Acidrod.com
Blanks by Brand
Secondary Nav
Abalone Veneer ▸
Swimbaits
Blanks ▸
Buttcaps-Gimbals ▸
Cork/Eva ▸
Cork Rings ▸
Decals ▸
Finish / Glues ▸
Fishing Line
Fly Rod Parts ▸
Grips ▸
Guides ▸
Misc Parts ▸
Reel Seats ▸
Thread ▸
Tools/Equipment▸
Weaving ▸
Login Account
0
0
Login Account
0
0
Acidrod.com
Blanks by Brand
Secondary Nav
Abalone Veneer ▸
Swimbaits
Blanks ▸
Buttcaps-Gimbals ▸
Cork/Eva ▸
Cork Rings ▸
Decals ▸
Finish / Glues ▸
Fishing Line
Fly Rod Parts ▸
Grips ▸
Guides ▸
Misc Parts ▸
Reel Seats ▸
Thread ▸
Tools/Equipment▸
Weaving ▸
Blanks by Brand
Folder: Secondary Nav
Back
Abalone Veneer ▸
Swimbaits
Blanks ▸
Buttcaps-Gimbals ▸
Cork/Eva ▸
Cork Rings ▸
Decals ▸
Finish / Glues ▸
Fishing Line
Fly Rod Parts ▸
Grips ▸
Guides ▸
Misc Parts ▸
Reel Seats ▸
Thread ▸
Tools/Equipment▸
Weaving ▸
Login Account
Shop Cork Filler
cork filler.jpg Image 1 of
cork filler.jpg
cork filler.jpg

Cork Filler

$6.95

This great filler works excellent on all kinds of cork grips and can be used to repair & recondition your cork handles instead of the tedious task of breaking it down to replace 3.25 fluid ounces.

  • Sands easily to a smooth finish

  • Resists shrinking + cracking

  • Easy water clean-up

  • Solvent free

  • Preparation:
    Surface must be clean & dry. Cork, filler & air temperature should be above 40°F.

    Filling:
    Apply to cork pits and grooves with a spatula, putty knife or similar tool. Remove excess. Deep repairs may need 2 or more fillings.

    Sanding:
    Sand shallow repairs after 15 minutes. Deep repairs after 2-8 hours. Use medium grit sand paper.

    Finishing:
    Before filling, test stain on scrap cork with filler. Apply cork seal or other finish after 24 hours.

  • Must be used with Cork Seal. Click HERE

  • Preparation:
    Surface must be clean & dry. Cork, filler & air temperature should be above 40°F.

    Filling:
    Apply to cork pits and grooves with a spatula, putty knife or similar tool. Remove excess. Deep repairs may need 2 or more fillings.

    Sanding:
    Sand shallow repairs after 15 minutes. Deep repairs after 2-8 hours. Use medium grit sand paper.

    Finishing:
    Before filling, test stain on scrap cork with filler. Apply cork seal or other finish after 24 hours.

Add To Cart

This great filler works excellent on all kinds of cork grips and can be used to repair & recondition your cork handles instead of the tedious task of breaking it down to replace 3.25 fluid ounces.

  • Sands easily to a smooth finish

  • Resists shrinking + cracking

  • Easy water clean-up

  • Solvent free

  • Preparation:
    Surface must be clean & dry. Cork, filler & air temperature should be above 40°F.

    Filling:
    Apply to cork pits and grooves with a spatula, putty knife or similar tool. Remove excess. Deep repairs may need 2 or more fillings.

    Sanding:
    Sand shallow repairs after 15 minutes. Deep repairs after 2-8 hours. Use medium grit sand paper.

    Finishing:
    Before filling, test stain on scrap cork with filler. Apply cork seal or other finish after 24 hours.

  • Must be used with Cork Seal. Click HERE

  • Preparation:
    Surface must be clean & dry. Cork, filler & air temperature should be above 40°F.

    Filling:
    Apply to cork pits and grooves with a spatula, putty knife or similar tool. Remove excess. Deep repairs may need 2 or more fillings.

    Sanding:
    Sand shallow repairs after 15 minutes. Deep repairs after 2-8 hours. Use medium grit sand paper.

    Finishing:
    Before filling, test stain on scrap cork with filler. Apply cork seal or other finish after 24 hours.

This great filler works excellent on all kinds of cork grips and can be used to repair & recondition your cork handles instead of the tedious task of breaking it down to replace 3.25 fluid ounces.

  • Sands easily to a smooth finish

  • Resists shrinking + cracking

  • Easy water clean-up

  • Solvent free

  • Preparation:
    Surface must be clean & dry. Cork, filler & air temperature should be above 40°F.

    Filling:
    Apply to cork pits and grooves with a spatula, putty knife or similar tool. Remove excess. Deep repairs may need 2 or more fillings.

    Sanding:
    Sand shallow repairs after 15 minutes. Deep repairs after 2-8 hours. Use medium grit sand paper.

    Finishing:
    Before filling, test stain on scrap cork with filler. Apply cork seal or other finish after 24 hours.

  • Must be used with Cork Seal. Click HERE

  • Preparation:
    Surface must be clean & dry. Cork, filler & air temperature should be above 40°F.

    Filling:
    Apply to cork pits and grooves with a spatula, putty knife or similar tool. Remove excess. Deep repairs may need 2 or more fillings.

    Sanding:
    Sand shallow repairs after 15 minutes. Deep repairs after 2-8 hours. Use medium grit sand paper.

    Finishing:
    Before filling, test stain on scrap cork with filler. Apply cork seal or other finish after 24 hours.

Similar Products

Foregrip-for-Fuji-SK2-Hood-and-Nut-KSKSS16-KSKSS17_Cork-1.jpeg Foregrip-for-Fuji-SK2-Hood-and-Nut-KSKSS16-KSKSS17_Cork-1.jpeg
Cork/EVA Foregrip for Fuji SK2 Hood and Nut BGKS
from $2.65
U-40CorkSealLifestyle_1024x﹖v=1585231361.jpg
U-40 Cork Seal
$6.85
RGK6016RC.jpeg RGK6016RC.jpeg
Fuji Cork Grips for Spin
from $6.39
bga95.png
Fuji Cork for Triggers BGA95RC
$9.35
Grade A Portuguese Cork Straight Rear Grip. 12"  .375" ID
Grade A Portuguese Cork Straight Rear Grip. 12" .375" ID
$21.99

CONTACT US

C & M Custom Tackle
150 S. Grand Ave. Suite C

Glendora, Ca 91741

(626)852-6060

Mon-Fri 10-4pm.

Saturday by appt.

SHOP

GIFT CARDS
BUILD A ROD

RESOURCES

FAQS
DOWNLOADS
SHIPPING

WHOLESALE
MILITARY DISCOUNT

FOLLOW US ON SOCIAL

SEARCH PRODUCTS

JOIN ACIDROD NEWSLETTER

Subscribe Today!

Get notified with new products, updates & more.

Thank you!
📸 SHARE YOUR PHOTOS 📸

Privacy Policy • Terms & Conditions | Return Policy | Warranty Info

Copyright© C&M Custom Tackle 2022 - All Rights Reserved